EonNAS 3000 Series Hardware Manual
55
7.
I
nsert the tray with the bezel opened and place your thumbs in front, on both
sides of the tray, gently push the tray into the enclosure until you feel the
connectors have met.
Insert with bezel opened
Place thumbs on both sides
8.
Lock the drive tray.
Turn the bezel lock to the vertical orientation (locked position)
using a flat blade screwdriver. Do not push the bezel lock while turning it,
otherwise the spring handle will pop out again.
NOTE
Never leave the bezel lock unlocked – the controller may consider it as a faulty drive.
9.
Check for hard drive error(s)
by looking at hard drive status LEDs. Make sure
the status LED lights up green (shown below).
