ESD Precautions
ESD Precautions
Handle the modules by their retention screws, ejector levers, or the module’s
metal frame/faceplate only. Avoid touching the PCB boards or connector pins.
Use a grounded wrist strap and an anti-static work pad to discharge static
electricity when installing or operating the enclosure.
Avoid dust, debris, carpets, plastic, vinyl, and styrofoam in your work area.
Do not remove any module or component from its anti-static bag before
installation.
Drives must not be stacked on top of each other without their protective drive
trays. Even when drives are fixed in the drive trays, contacting the exposed PCB
or rear-side interface may damage the drives.
