InfoPrint 6500 DBCS, User Manual

Page: 67 / 230

67
Recall Custom Set
The printer can store 8 custom sets in NVRAM. This parameter allows you to
select and load a specific custom set.
•
Factory Default (the default). The factory–preset custom set; its
parameters cannot be changed. It is always available for loading.
Custom/Preload Sets 5-8 contain configuration sets that assist with the
installation and configuration of this printer. These sets are preloaded at the
factory. If these sets are not used, you can delete them and create new
custom sets.
Save Current Values
This option allows you to save your custom sets to meet different print job
requirements. This eliminates the need to change the parameter settings for
each new job.
The custom sets are stored in NVRAM—they will not be lost if you power off
the printer.
Factory default is a factory–preset custom set; it cannot be changed or saved.
IMPORTANT
A new custom set will overwrite an existing custom set if the PROTECT
CUSTOM SETS parameter is disabled (e.g., a new Custom Set 4 will
overwrite an existing Custom Set 4). See the “Protect Custom Sets” in
this section.
Delete Custom Set
You can delete one or all of your customized or preloaded custom sets.
Factory default is a factory–preset custom set and cannot be changed or
deleted.
Change Power On Set
You can specify which of the custom sets will be the power-on custom set.
The printer will power on with the factory set values or with one of the
customized configurations.
Configuration Management Menu