InfoPrint 6500 DBCS, User Manual

Page: 64 / 230

64
Chapter 4
Printer Control Menu
Top Exit Tear Distance
The eject distance for the EJECT/RESTORE type TOP EXIT TEAR.
•
7.46 Inches (default)
•
4.50 - 10.50 Inches
Ribbon End Point
This parameter adjusts the point at which the system will declare the ribbon
as being expended. The life count will always be from 100% to 0%, but if a
darker setting is selected 0% will be reached more quickly. If a lighter setting
is selected, the system will extend the time it takes to reach 0%. The range of
values are as follows:
•
Lighter -1 through Lighter -10
•
Normal
•
1 through 6
NOTE: This value can be adjusted at any time and the display will
automatically adjust to show the correct percentage relative to the
new end point.
Ribbon Action
•
Stop Ribbon End (the default). Stops ribbon action when ribbon life
reaches 0%.
•
Ignore Ribbon End . When selected, the ribbon life display remains on
the control panel, and the printer continues to monitor ink consumption.
DBCS Download
Allows you to save and delete downloadable DBCS characters from flash.