InfoPrint 6500 DBCS, User Manual

Page: 106 / 230

106
Chapter 4
Emulation Configuration Menu
Proportional Spacing
Uses proportional spacing for text data when enabled.
•
Disable (the default)
•
Enable . Uses proportional spacing for text data.
NOTE: Proportional spacing is only supported in 10 CPI. Therefore, you must
select 10 CPI, or proportional spacing will be ignored.
Italic Print
Prints text in italics, when enabled. Both a forward and backwards slanting
italic are available.
•
Disable (the default)
•
Forward Slant . Uses italic print that slants forward.
•
Backward Slant . Uses italic print that slants backward.
Slashed Zero
Prints zeros with a slash, when enabled, to distinguish zeros from the
alphabetic capital “O.”
•
Disable (the default)
•
Enable . Prints zeros with a slash.
DBCS To ASCII
This option specifies the operation mode of the printer
•
DBCS Mode. Prints DBCS characters. (the default)
•
ASCII Mode. Treats all as ASCII character.
DBCS ASCII Style
This option specifies the appearance of single byte numeric characters.
For Hanzi LP+, select from Normal (the default), Oversize, and OCR B.
For Hangul LP+, select from Normal (the default) and OCR B.
Compressed Mode
This selects whether the printer works in compressed mode. The values are
Disable (the default) and Enable.
DBCS Compressed
This selection specifies the appearance of DBCS and ASCII characters under
DBCS mode. The values are Disable (the default) and Enable.