April 10, 2013
INFODRAW TMRS User Manual v5.3
4
When charging the unit:
•
The TMRS unit’s maximum power input is
5V
. The chargers supplied by Infodraw
provide the correct (5V) power output to the unit. WHEN CHARGING THE UNIT,
ONLY USE THE CHARGERS PROVIDED BY INFODRAW. DO NOT CHARGE THIS UNIT
WITH ANY HIGHER VOLTAGE THAN
5V
. THIS MAY CAUSE IRREVERSIBLE INTERNAL
DAMAGE TO THE UNIT’S HARDWARE COMPONENTS.
•
Never use a damaged charger to charge the device.
When configuring the unit:
•
The TMRS unit has to be configured prior to operation and later on as well. The
configurations are done using the Device Configurator Application on any PC,
through the USB Cable provided. MAKE SURE THAT ANY
SIM CARD
IN THE UNIT IS
REMOVED
BEFORE CONFIGURING THE UNIT THROUGH THE USB CABLE.
Using the unit’s Dip Switches:
•
The TMRS Unit has 4 Dip Switches used for setup and operation, located on the side
of the unit. The functions of each dip switch can be found in the
Dip Switch section
of the
Unit Hardware Interfaces chapter
in this manual. Make sure you understand
the functions of each dip switch, prior to using the unit.
When installing the unit in a vehicle:
•
Only use Infodraw Chargers to charge the TMRS Unit. Non-Infodraw chargers are not
covered by the 1 Year Limited Warranty.
•
When installing custom 12V Power Outlets directly into vehicle batteries, please
ensure that this is done by a qualified, experienced Auto Electrician.
Disposal and Recycling:
Please ensure this product is recycled in an environmentally friendly way. You must dispose
of the TMRS device properly according to local laws and regulations. As the TMRS device
contains electronic components and a lithium battery, it must be disposed of separately
from household waste. When the TMRS device reaches the end of its life, contact local
authorities to learn about disposal and recycling options.
Copyright
© 2012 Infodraw R&D LTD. All rights Reserved.
Information in this manual is protected by copyright laws and is the property of INFODRAW.
No part of this manual may be reproduced, copied, translated, or published in any form or
by any means without INFODRAW’s prior permission. Information is this manual is subject
to change by INFODRAW without prior notice.
