April 10, 2013
INFODRAW TMRS User Manual v5.3
166
3-17 LAN:
The unit has a built-in LAN interface. It can connect to the MRS server through the internet
via any local network. An Ethernet cable is included with the unit.
Follow these instructions to set up the LAN function on the TMRS:
1)
Open the
“Device Configurator”
Application.
2)
Turn the TMRS OFF.
3)
Ensure the 2 left dip switches on the TMRS unit (numbers 1,2 are in up position).
4)
Ensure the SIM card is
NOT
inserted into the unit.
5)
Connect the TMRS unit to the PC using the USB Cable. Then turn it on.
6)
Once connected to the PC, the unit’s parameters will load automatically on the
“Device Configurator”
.
7)
Go to the
“Local Network”
menu on the left hand side. Under the “
Address
Configuration Method”
menu, select
“DHCP”
.
