106 / 108
stream is jerking, …)
on the computing power of the
PC / laptop and the interaction
and CPU load with other running
software applications.
⚫
A laptop in battery mode can be
switched to reduced computer
power, to save energy.
The
transmission
of
HD
video
requires a certain amount of CPU
power to guarantee the optimum
quality of the transmission.
⚫
Update the software of your
Video-player
to
the
latest
version.
⚫
Reduce the CPU usage of other
software applications.
⚫
Lower the screen resolution of
the Laptop.
⚫
Update driver of graphic-card.
⚫
End low power mode at laptop.
Video is not shown on screen
The content use HDCP
⚫
iShare X
input can’t support
showing HDCP source. If possible,
connect the source device to
local HDMI input at base unit.
The display cable (HDMI) is not
correctly connected.
⚫
Insert the display cable to the
display and the Base-unit.
The displays is switched off.
⚫
Switch on the display.
The Base-unit is in standby mode,
“Power
-
LED” is flashing at Base unit.
Power-supply is missed.
⚫
Power off and on again or insert
a dongle into laptop.
When using window 7 the following
message about the Window Aero
color scheme apprears “Windows has
detected
your
computer’s
performance is slow. This could
because these are not enough
resources to run the windows Aero
color scheme. To improve… ”
iShare X uses resource from the GPU.
In combination with other programs
which do so, Window 7 sometimes
shows this message suggesting to
disable
Aero
to
improve
the
performance of lap-top.
⚫
It’s safe to ignore this message
and choose “Keep the current
color scheme.”
Your content is removed from the
display and the LEDs on the button are
blinking
Connection to the Base Unit is lost.
iShare X tries to restore the
connection automatically. If it fails, the
LEDs on the button start blinking red.
Unplug the button from your lap-top
and try a new button.
Nothing is shown on the displays at all The displays are switched off.
Switch on the display
The display cable is not correctly
connected
Insect the display cable to the display
and the Base Unit
The Base Unit is in standby mode
Briefly push the standby button on the
Base Unit or power off and on again
the Base Unit.
No LAN connection with the Base Unit Wrong IP address
IP address is not within LAN range
DHCP is not enabled.
Summary of Contents for iShare CX
Page 30: ...30 108 ...
Page 31: ...31 108 Now the driver is installed iShare HX HDMI dongle ...
