19 / 108
the bottom of base unit.
3.
Place the iShare X400 on the wall and fixate the base unit with the 2 screws.
Antenna placement rules
⚫
The antennas should be oriented vertically, so perpendicular to the ceiling and parallel to the walls.
⚫
The antennas should be installed far enough (at least 50cm/1.6ft) from metallic surfaces to avoid unwanted reflections
and far enough (at least 1m/3.3ft) from other radio equipment that operates in the same frequency range, e.g. other
Wi-
Fi access points, cordless telephone, microwave ovens,…. It is also best to install antennas at least 15 cm (6 inches)
from concrete walls.
⚫
The most favorable situation is a direct line of sight between antennas and Buttons. Any obstruction will cause the signal
to follow a longer propagation path, which can result in performance degradation.
⚫
Due to the radio pattern of the dipole antennas, the antennas should not be placed just above potential positions of
iShare X users. As a result, the advised position for the antennas is at the side of the meeting room.
4.2
Wiring Diagram
4.3
Power Connection
The Base unit can be powered by the external universal power adapter.
How to connect the external power adapter
Summary of Contents for iShare CX
Page 30: ...30 108 ...
Page 31: ...31 108 Now the driver is installed iShare HX HDMI dongle ...
