Infinova V3070-8 Series, User Manual

Page: 65 / 90

57
\Figure 7-30 Network
Parameter Function
Remote host PPPOE
Input the user name and
password which ISP (Internet
service supplier) provided and
chose enable.
Reboot system after
configuration is saved and the
device will auto connect to
Internet. The IP address is the
WAN IP.
There are two conditions for
reboot,
1. The user must have the
authority to reboot device.
2. There is no user login the
system menu on the local end
After PPPOE dial succeed, get
the current IP address and visit
this IP address via WEB.
Email
The email interface is shown as in Figure 7-31.
Figure 7-31 Email
Please refer to the following sheet for detailed information.
Parameter Function
SMTP
Server
Input server address and then enable this function.
You can also input the corresponding server
domain name here, but you need to go to DNS
interface ( Section 7.3.4.1 ) to set the server IP that
can parse the domain.
SSL
enable
You can enable SSL encryption function to
guarantee data safety.
Port Default value is 25. You can modify it if necessary.
User Name The sender email account user name.
Password The sender email account password.
Sender Sender email address.
Subject Input email subject here. Max 32-digit.
Address Input receiver email address here. Max input three
addresses.
Interval Please input the send interval value here.
DDNS
The DDNS interface is shown as in Figure 7-32.