Infinova V3070-8 Series, User Manual

Page: 79 / 90

71
Figure 7-67 Alarm
Please refer to the following sheet for detailed information.
Type Parameter Function
Alarm
Type
Video loss System alarms when video loss occurs.
Motion
detection
System alarms when motion detection
alarm occurs,
Disk full System alarms when disk is full.
Disk error System alarms when disk error occurs.
Camera
masking
System alarms when camera is
viciously masking.
External
alarm
Alarm input device sends out an
alarm.
Offline
alarm
NVR local-end offline alarm.
IPC external
alarm
It refers to the on-off alarm signal
from the front-end device and can
activate NVR local operation.
IPC offline
alarm
System can generate an alarm when
the front-end IPC disconnects with the
local NVR.
Operation
Listening
alarm
System notifies web when an alarm
occurs (you select from the above
event type), and then web can notify
user.
Type Parameter Function
Video
When an alarm occurs, system auto
enables video monitor.
This function only applies to video
detection alarm (motion detection,
video loss and camera masking). This
function is not available in current
device.
Prompt
Automatically pops up alarm dialogue
box.
Sound pop
up
System sends out alarm sound when
an alarm occurs. You can specify as
you wish.
Path Here you can specify alarm sound file.
7.7 About
Click about button, you can view the web information. See Figure
7-68.
Figure 7-68 About
7.8 Log out
Click log out button, you can go back to log in interface. See Figure
7-69.
Figure 7-69 Logout