Inficon HLD6000, Translation Of The Original Operating Instructions

Page: 28 / 90

5 | Installation INFICON
28 / 90 HLD6000-Operating-instructions-kinb43en1-05-(2107)
1
Align the red marking on the sniffer line plug with the red marking on the socket
of the device (see “Basic unit [ } 13]“, Fig. 1).
2 Push the sniffer line plug into the socket on the device until it locks into place.
ð The plug may no longer be easy to move.
5.2.2 Exchanging the sniffer line
1 Select the sniffer line of the gas you wish to detect.
2 Switch the instrument off.
3 To release the plug on the sniffer line from the socket of the device, pull the
grooved ring on the plug until the lock is opened.
4
Pull off the sniffer line.
5
Attach the new sniffer line.
ð
You can switch the device back on again.
HLD6000 with one PLUS sniffer line
To operate a PLUS sniffer line, a basic unit software version of V2.11 or later is
required.
The device automatically adjusts to the connected sniffer line (Standard or PLUS).