IMC Networks iMcV-FiberLinX-II Operation Manual Download

Page: 4 / 60

Transparent with VLAN Tag on EXT MGMT Port------------------------------------- 27

Default Mode ------------------------------------------------------------------------------- 28

Port VLAN on OPTICS (or UPLINK) port ---------------------------------------------- 28

Port VLAN on DATA Port ----------------------------------------------------------------- 29

Management VLAN and EXT MGMT Tag---------------------------------------------- 29

Port VLAN Filter ---------------------------------------------------------------------------- 30

VII - Application Overview ---------------------------------------------------------------------- 33

VIII - Application Examples---------------------------------------------------------------------- 34

Transparent with Tagged Management---------------------------------------------------- 36

Transparent with Tagged Management---------------------------------------------------- 37

Transparent with Extra Tagging (Q-in-Q)-------------------------------------------------- 39

Port VLAN--------------------------------------------------------------------------------------- 42

VLAN on DATA Port - Configuration --------------------------------------------------- 42

VLAN on OPTIC Port - Configuration -------------------------------------------------- 44

IX - Troubleshooting ------------------------------------------------------------------------------ 49

Troubleshooting LinkLoss/FiberAlert/Link Fault Pass-Through ---------------------------- 51

FX LinkLoss ---------------------------------------------------------------------------------- 52

TX LinkLoss ---------------------------------------------------------------------------------- 53

FiberAlert------------------------------------------------------------------------------------- 53

FiberAlert------------------------------------------------------------------------------------- 54

Link Fault Pass-Through ------------------------------------------------------------------- 54

Link Fault Pass-Through ------------------------------------------------------------------- 55

IMC Networks Technical Support-------------------------------------------------------------- 56

Specifications -------------------------------------------------------------------------------------- 56

Standards/Compliance --------------------------------------------------------------------------- 56

Serial Port Pinout---------------------------------------------------------------------------------- 57

Safety Certifications------------------------------------------------------------------------------- 59

Summary of Contents for iMcV-FiberLinX-II





























































Search results

Summary of Contents for iMcV-FiberLinX-II

Reviews:

Related manuals for iMcV-FiberLinX-II

Brands by name

Popular brands

IMC Networks iMcV-FiberLinX-II, Operation Manual

Search results

Summary of Contents for iMcV-FiberLinX-II

Reviews:

Related manuals for iMcV-FiberLinX-II

Brands by name

Popular brands