Transparent with Tagged Management
Transparent with Tagged Management mode passes both tagged and untagged traffic
between the DATA port and the OPTICS (or UPLINK) port. By using a VLAN Tag you
can isolate and route the management path in the module. This method can be used
with or without continuing the management path down the EXT MGMT port.
To configure this mode, do the following:
1.
Set the management DIP switch ON for the ports using management (in this
example it is the OPTICS (or UPLINK) 3 = ON and EXT MGMT 1 = ON).
2.
Set Transparent Mode to allow both tagged and untagged traffic to pass:
a.
In the Main Configuration screen, press the space bar and type config. The
Configuration screen displays:
b.
Enter Y in the Transparent Mode field and press any key (except S or Q) to
open the Transparent Mode Setup screen.
TRANSPARENT MODE SETUP
Is a VLAN tag required on Management packets? [ Y ]
er Y for Extra Tagging.
Do you want to enter the Extra Tag mode? Ent
nter N if you do not want Extra Tags [ N ]
E
re VLAN Tags required on the EXT Port? [ N ]
A
Type S or F3 to save the new information
ype Q of F4 to quit and cancel changes
T
Reboot is required for any change to take affect.
Transparent Mode – with either (not both) Data and Optics Mgmt dipswitches
set to on, all traffic passes between Optics and Data port EXCEPT what has
been defined as the Management Domain. The Management Domain can either be
efined as untagged traffic or traffic with a specified VLAN ID.
d
In Transparent Mode with BOTH Optics and Data Mgmt dipswitches set to off,
ll traffic passes between the Optics and Data Ports.
a
efault Mode – the unit passes only Untagged Packets.
D
he unit is currently
in Default Mode
.
T
Enter Y for Transparent Mode, N for no Transparent Mode or <enter> to
move to other options [ Y ]
c.
Enter Y in the
Is a VLAN tag required on Management packets?
field. The screen displays the management tag fields:
Is a VLAN tag required on Management packets? [ Y ]
The Management Tag is [0 ]
Management Priority is [0 ]
d.
Enter the management tag (VLAN ID) and the priority (optional).
Is a VLAN tag required on Management packets? [ Y ]
The Management Tag is [7 ]
Management Priority is [0 ]
e.
Ensure the
Are VLAN Tags required on the EXT Port?
field is set to
N.
37
Summary of Contents for iMcV-FiberLinX-II
Page 1: ...iMcV FiberLinX II Operation Manual...
Page 55: ...Link Fault Pass Through 55...
Page 58: ...Notes 58...
