8. Route all the other power cords neatly, using the cable-management bracket if it
is installed, and secure the power cords with cable straps.
Note:
To route a power cord through the cable-management bracket, route the
cord through an opening in the bracket and against an upper or lower tab on
the bracket, as shown in the following illustration. Use cable straps as required.
Tab
Installing the PDU in the side of an IBM Enterprise rack cabinet only
Note:
Removing the rack doors and side panels might make installation easier.
See the rack cabinet documentation for more information.
Review the documentation that comes with your rack cabinet for safety and cabling
information. When you install the PDU in a rack cabinet, observe the following
precautions:
v
Make sure that the room air temperature is below 35°C (95°F).
v
Do not block any air vents; usually 15 cm (6 in.) of air space provides proper
airflow.
v
Connect all power cords to properly wired and grounded electrical outlets.
v
Do not overload the power outlet when you install multiple devices in the rack.
Chapter 2. Installing the PDU vertically in a rack cabinet
15
