Chapter 7. Customer replaceable unit parts
Replaceable components are of three types:
v
Tier 1 customer replaceable unit (CRU):
Replacement of Tier 1 CRUs is your
responsibility. If IBM installs a Tier 1 CRU at your request, you will be charged for
the installation.
v
Tier 2 customer replaceable unit:
You may install a Tier 2 CRU yourself or
request IBM to install it, at no additional charge, under the type of warranty
service that is designated for your server.
v
Field replaceable unit (FRU):
FRUs must be installed only by trained service
technicians.
For information about the terms of the warranty, see the
IBM Warranty Information
document that comes with the PDU.
Important:
The PDU does not contain any serviceable parts.
PDU description
PDU
Tier 1 CRU
part number
Power cord
Tier 1 CRU
part number
DPI 32 amp/250 V 1-phase Enterprise C13 PDU+
with IEC 309 2P+N+Gnd connector
40K9637
39M5428
DPI 60 amp/208 V 1-phase Enterprise C13 PDU+
with IEC 309 2P+Gnd connector
40K9637
39M5431
DPI 63 amp/250 V 1-phase Enterprise C13 PDU+
with IEC 309 2P+N+Gnd connector
40K9637
39M5429
DPI 32 amp/250 V 3-phase Enterprise C13 PDU+
with IEC 309 3P+N+Gnd connector
40K9637
39M5427
DPI 30 amp/208 V 1-phase Enterprise C13 PDU+
with Nema L6-30P connector
40K9637
39M5430
DPI 60 amp/208 V 3-phase Enterprise C13 PDU+
with IEC 309 3P+Gnd connector
43V5995
Cord comes
attached to PDU
DPI 60 amp/208 V 1-phase Enterprise C19 PDU+
with IEC 309 2P+Gnd connector
40K9638
39M5431
DPI 63 amp/250 V 1-phase Enterprise C19 PDU+
with IEC 309 2P+N+Gnd connector
40K9638
39M5429
DPI 32 amp/250 V 3-phase Enterprise C19 PDU+
with IEC 309 3P+N+Gnd connector
40K9638
39M5427
DPI 60 amp/208 V 3-phase Enterprise C19 PDU+
with IEC 309 3P+Gnd connector
40K9639
Cord comes
attached to PDU
Environmental monitoring probe kit
41Y9210
Mounting hardware kit
41Y9284
DB9-to-RJ-45 cable
40K9640
© Copyright IBM Corp. 2006, 2013
49
