Changing event alerts
On the SNMP Trap Receivers page, you can change event alerts.
To configure the PDU to send e-mail or SNMP trap alerts to specified users when
specific events occur, complete the following steps:
1. From the main status page, in the left navigation pane, click
System
.
2. Click
Trap Receivers
to create a list of users or workstations who will be
alerted with an SNMP trap message. You can specify the IP addresses of up to
eight trap receivers, the community information, type of trap, severity of trap,
and description of the events that cause the traps.
40
DPI C13 PDU+, DPI C13 3-phase PDU+, DPI C19 PDU+, and DPI C19 3-phase PDU+: Installation and Maintenance Guide
