Selenio™ Network Processor
User Guide
Configuring Programs
© 2019 Imagine Communications Corp.
Proprietary and Confidential.
May 2019 | Page 94
•
Changes to the controls that are marked with the green LIVE tag will be sent to the device
immediately without clicking the
Apply
button.
Program Configuration: Input Tab
Depending on the mode for the section (group of four inputs in the section), different options will
appear.
•
Input IP Options
(on page
•
Input SDI Options
(on page 104)
Pixel Format (Input Tab)
This section only appears when the Processor is in Remap or Conversion mode.
UHD Quad Input Pixel Format
Select
If the input is UHD, this selection determines how incoming video is
interpreted:
•
Square Division
•
Pixel Interleave
The Square Division option is only available when the Input Mode is SDI.
This selection only has an effect when using Quad inputs; 12G is always
interleave.
UHD Input Pixel Format Used
This status is only available in Conversion mode.
This read-only parameter indicates
Yes
(indicating a mismatch) when both
input and output are configured to UHD and either one is set to SQD in
Conversion mode. This setting is independent of the real input/output
standard, which can be HD.
Input IP Options
When a Section/Channel is in IP Input Mode, parameters will be available, divided into the following
groups:
•
IP Video Configuration (Input) (on page
•
IP Video Status (on page 97)
Statistical Counters
Missing Packet and Out-of-Range Packet statistics counters are reported by the 2022-7 component.
There are three each of these parameters, described in the following topics:
•
IP Video Status
(on page
•
IP Audio Status
(on page 100)
•
IP Ancillary Data Status (IP Input)
(on page 103)
