Illinois Tool Works 5750-440, Operation Manual

Page: 35 / 85

OPERATIONS MANUAL – 5750440 – REVISION D
Shift
Number
Start
Time Shift
Name
1 08:00 A
2 16:00 B
3 00:00 C
4 00:00
5 00:00
6 00:00
Rollover Hour (0-23):
0 0
Setting Work Shifts
D4
This function enables you to divide the workday into shifts and assign a start time and a name to each shift.
1
1
Press SET-UP.
2
2
Press 4 for “4-Work Shifts.” The LCD
will prompt “Set Shifts (1-6).”
3
3
Type the number of a shift to define
and press ENTER.
4
4
The LCD will prompt for a start time
from a 24-hour clock.
Scroll to the starting hour and press
ENTER. The cursor will move to
minutes. Scroll to the starting
minutes of the hour. Press ENTER.
5
5
The LCD will prompt for the name of the shift.
Type a name for the shift (1 to 19 alphanumeric
characters). This is the name that will print in your
messages. The table at right shows the default values.
Note that if you use less than three shifts, edit shift 3 by
deleting the name “C.”
6
6
Repeat steps 2 through 5 to create additional shifts.
7
7
Press SET-UP to exit the work shift set-up.
Setting the Shift Start (Code Date)
D5
Code Date allows you to change the time for work shifts to begin from midnight to another hour in the day.
1
1
Press Set-Up.
2
2
Press G for “G-Code Date.”
The LCD will prompt for an entry from 0 to 23
that identifies the hour the work shifts start again.
3
3
Type the hour to restart work shifts and press ENTER.
If you want to keep the rollover hour at midnight, leave
the default value of 00 and press ENTER.
Set Shifts (1-6):
Shift:
1
Start:
0
8 :00
Shift Name:
A <