Illinois Tool Works 5750-440, Operation Manual

Page: 24 / 85

OPERATIONS MANUAL – 5750440 – REVISION D
Setting the Default Character Width
C4
This feature enables you to set the horizontal space between the dots in a printed character. The default
value is 6. See Instruction C3 for scanned samples of different character widths.
1
1
Press SET-UP.
2
2
Press CHARACTER WIDTH.
3
3
The LCD will show a range of 1
(narrow) to 9 (wide).
Select a width by scrolling and press
ENTER.
4
4
Press ENTER to finish.
Set Character Width:
6
CHANGING THE CHARACTER WIDTH The character width set in this routine will
be the default character width for all messages created in the future. To change the
character width in an existing message, follow the directions in Instruction C3,
“Changing the Character Width in a Message”.