Inclination sensor JN
38
The faults are signalled according to the set fault function FOU1 or FOU2 (if ON
OFF or TOGGLE has been selected) not before a sensor fault (MEMS cell) is
continuously present after the set time.
Accordingly, a sensor fault has to be eliminated continuously after the set time
before fault signalling is removed and the switching outputs return to the states
according to the process values.
The actually effective delay is internally rounded to 10 ms.
14.12 Output driver PnP or nPn
The physical switching characteristics for both digital outputs can be defined via
the ISDI index 500:
●
0 = high side switching (PnP): on activation the output is switched to +U
b
●
1 = low side switching (nPn): on activation the output is switched to ground
Switching output Switching output
OUT1/IO
-Link
PnP
+24V
OUT1/IO
-Link
OUT2
nPn
+24V
OUT2
