IFM Ecomat 300 AC1375, Device Manual

Page: 463 / 523

ifm Device manual AS-i M4 Gateway Profibus DPV1 (AC1375, AC1376) 2012-02-23
Operation Display slave data
463
AS-i 1 Slave 2B
Analogue CH1 OUT +312
Analogue CH2 OUT +120
Analogue CH3 OUT +10
Analogue CH4 OUT +75
MORE
163
ESC
Step 9:
Figure only for CTT slaves
> Dynamic display of the analogue output channels as decimal values:
 If the slave has no analogue channel:
Display of the value as ". . . . . .".
► Press [ ] or [ ] to scroll to any other slave address.
► Scroll to the next screen with [MORE].
Alternatively:
► Press [ESC] to return to the screen in step 5.
.
AS-i 1 Slave 18A
Slave in transparent mode
CTT transfer valid
CTT output valid
Overf.: 0000 Valid: 0000
MORE
164
ESC
Step 10:
Figure only for CTT slaves
> Dynamic display of the flags of the analogue channels:
Meaning

chapter Status information of analogue slaves
( → page 465 ).
► Press [ ] or [ ] to scroll to any other slave address.
► Scroll to the next screen with [MORE].
Alternatively:
► Press [ESC] to return to the screen in step 5.
6003
AS-i 1 Slave 18A
LAS LDS LPS LPF
MORE
66
ESC
Step 11:
AC1375: Menu screen number = 34
> Display in which slave lists the slave is entered:

LAS: list of activated slaves,
 LDS: list of detected slaves,
 LPS: list of projected slaves,
 LPF: list of slaves with peripheral fault.
► Press [ ] or [ ] to scroll to any other slave address.
► Scroll to the next screen with [MORE].
Alternatively:
► Press [ESC] to return to the screen in step 5.