![background image](http://html1.mh-extra.com/html/ifm/ecomat-300-ac1375/ecomat-300-ac1375_device-manual_3912477211.webp)
ifm
Device manual AS-i M4 Gateway Profibus DPV1 (AC1375, AC1376)
2012-02-23
DP module 12: extended command channel
Commands in the extended command channel
211
11.3
Commands in the extended command channel
Module 12, extended command 00 = execute no command .................................................... 212
Module 12, extended command 01 – change slave parameters .............................................. 213
Module 12, extended command 03 – adopt and save connected AS-i slaves in the
configuration ............................................................................................................. 216
Module 12, extended command 04 – change the list of projected AS-i slaves (LPS) .............. 219
Module 12, extended command 05 – change the operating mode of the AS-i master............. 222
Module 12, extended command 06 – change the AS-i slave address...................................... 224
Module 12, extended command 07 – set the autoaddress mode of the AS-i master............... 227
Module 12, extended command 09 – Change [extended ID code 1] in the connected
AS-i slave.................................................................................................................. 229
Module 12, extended command 10...20 (0A...14hex) – force analogue data transmission
directly to / from 3 AS-i slaves each ......................................................................... 232
Module 12, extended command 21 (15hex) – read 7.4 ID string of an AS-i slave ................... 238
Module 12, extended command 25 (19hex) – set AS-i master test mode................................ 242
Module 12, extended command 26 (1Ahex) – read AS-i master version ................................. 244
Module 12, extended command 28 (1Chex) – no slave reset when changing to the
protected mode ......................................................................................................... 246
Module 12, extended command 31 (1Fhex) – execute the extended safety monitor
protocol in the Safety-at-Work monitor once ............................................................ 248
Module 12, extended command 33 (21hex) – read 7.4 diagnostic string of an AS-i slave....... 253
Module 12, extended command 34 (22hex) – read 7.4 parameter string of an AS-i slave ...... 255
Module 12, extended command 35 (23hex) – write 7.4 parameter string of an AS-i slave ...... 257
Module 12, acyclic command 36 (24hex) – standard read call to an AS-i slave with
CTT2 profile .............................................................................................................. 259
Module 12, acyclic command 37 (25hex) – standard write call to an AS-i slave with
CTT2 profile .............................................................................................................. 264
Module 12, acyclic command 38 (26hex) – manufacturer-specific read call to an AS-i slave
with CTT2 profile....................................................................................................... 269
Module 12, acyclic command 39 (27hex) – manufacturer-specific write call to an AS-i slave
with CTT2 profile....................................................................................................... 274
Module 12, extended command 50 (32hex) – read current configuration of
AS-i slaves 0(A)...15(A) ............................................................................................ 279
Module 12, extended command 51 (33hex) – read current configuration of
AS-i slaves 16(A)...31(A) .......................................................................................... 282
Module 12, extended command 52 (34hex) – read current configuration of
AS-i slaves 1B...15B ................................................................................................. 284
Module 12, extended command 53 (35hex) – read current configuration of
AS-i slaves 16B...31B ............................................................................................... 286
Module 12, extended command 54 (36hex) – read current parameters of the AS-i slaves ..... 288
Module 12, extended command 55 (37hex) – read current AS-i slave lists ............................. 291
Module 12, extended command 56 (38hex) – read projected configuration of
AS-i slaves 1(A)...15(A) ............................................................................................ 293
Module 12, extended command 57 (39hex) – read projected configuration of
AS-i slaves 16(A)...31(A) .......................................................................................... 296
Module 12, extended command 58 (3Ahex) – read projected configuration of
AS-i slaves 1B...15B ................................................................................................. 298
Module 12, extended command 59 (3Bhex) – read projected configuration of
AS-i slaves 16B...31B ............................................................................................... 300
Module 12, extended command 96 (60hex) – save data in the non volatile flash