ifm
Basic Device Manual AS-i ControllerE M4 Target V15
2015-10-30
Function
Introduction AS-i data
41
Slave profile for slaves with combined transmission
Structure slave profile = S-[IO code].[ID code].[ext.ID code2]
Slave
profile
Master
profile
Use of analogue channels in the
controllere
Binary bits
D0…D3
Additional
acyclic
string data
transmission
Combined
transmission
CTT
Number
of
channels
Use analogue / binary
S-6.0
M4
1 I
and
1 O
2/3/4 x 4 binary inputs
and
2/3/4 x 4 binary outputs
––
no
type 5
S-7.3
M3
1/2/4 I
or
1/2/4 O
1/2/4 analogue inputs
or
1/2/4 analogue outputs
––
no
type 1
S-7.4
M3
1/2/4 I
or
1/2/4 O
1/2/4 analogue inputs
or
1/2/4 analogue outputs
or
4 inputs
4 outputs
yes
type 1
S-7.5.5
M4
0…4 I
and
0…4 O
0…4 analogue inputs
or
< 64 binary inputs
and
0…4 analogue outputs
or
< 64 binary outputs
and
2 inputs
2 outputs
yes
type 2
S-7.A.5
M4
0…2 I
and
0…2O
0…2 analogue inputs
or
< 32 binary inputs
and
0…2 analogue outputs
or
< 32 binary outputs
and
2 inputs
1 output
yes
type 2
S-7.A.7
M4
––
––
4 inputs
4 outupts
no
type 3
S-7.A.8
M4
1 I
1 analogue input
or
< 16 binary inputs
and
1 output
no
type 4
S-7.A.9
M4
2 I
2 analogue inputs
or
<32 binary inputs
––
no
type 4
S-7.A.A
M4
1 I
and
1 O
8 binary inputs
and
8 binary outputs
––
no
type 3
S-B.A.5
M4
0…2 I
and
0…2 O
0…2 analogue inputs
or
< 32 binary inputs
and
0…2 analogue outputs
or
< 32 binary outputs
––
yes
type 2
NOTE
Further slave profiles are continuously developed and approved by the technical commission of "AS-
International Association". The AS-i controller can only communicate with slaves whose profiles are
defined in the controller operating system.
► Contact your AS-i specialist.
