![background image](http://html1.mh-extra.com/html/ifm/ecomat-300-ac1029/ecomat-300-ac1029_basic-device-manual_620662103.webp)
ifm
Basic Device Manual AS-i ControllerE M4 Target V15
2015-10-30
Menu
Main menu [Diagnostics]
103
9.6
Main menu [Diagnostics]
Display of status information of the masters and reset of the error counters
Menu tree
Description
Diagnostics
AS-i Master 1
Diagnostics
AS-i Master 1
Voltage Disturbance
Power failure:
>
Display of the number of power failure incidents on the AS-i
bus.
Diagnostics
AS-i Master 1
Configuration Error
Configuration errors:
>
Display of the number of found configuration errors since
the last reset
Diagnostics
AS-i Master 1
Telegram Error
Telegram errors:
>
Display incorrect AS-i telegrams in per cent of the sent
telegrams.
► After [MORE]:
>
Display of the number of active slaves
>
Display of the number of AS-i cycles per second
NOTE
For the evaluation of the information please note: The controllere polls A/B slaves connected as pairs
(i.e. with the same address) only in every other cycle.
Diagnostics
AS-i Master 1
Noisy Slaves
Noisy Slaves:
>
Display of the number of disturbed telegrams of every
active slave
► After [SORT]:
>
New sorting of the table by the number of disturbed
telegrams.
Diagnostics
AS-i Master 1
Reset Error Counter
Reset of the error counter (password level 1 required):
→ page
► After [OK]:
>
Set all error counters to 0.
Diagnostics
AS-i Master 1
Cycle time
Cycle time:
>
Display of the longest cycle time of the system in [ms] since
the last reset.
► After [CLEAR]:
>
Reset the previous measurement series and start a new
measurement series.
Diagnostics
AS-i Master 2
See AS-i master 1
Diagnostics
Safety Master 1
Diagnosis of safety monitor on master 1
Diagnostics
Safety Master 1
Read Monitor
Reading the status of the safety monitors
>
Status information of OSSD (Output Signal Switching
Device)