![background image](http://html1.mh-extra.com/html/ifm/ecomat-300-ac1029/ecomat-300-ac1029_basic-device-manual_620662125.webp)
ifm
Basic Device Manual AS-i ControllerE M4 Target V15
2015-10-30
Set-up
Set the baud rate of the serial interface
125
7.
► Enter "RS 232" as name
► Select [Serial (RS232)] as device
► Confirm with [OK]
8.
► Double-click to change the baud rate step
by step until the value corresponds to the
setting in the controllere
→ page
► Adopt with [ENTER]
► Confirm with [OK]
► Test connection with the menu sequence
[Online] > [Login]
>
If response "Communication Error", then:
► change the baud rate step by step and
test communication again
>
If there is a connection between the PC
and the controllere, then message →
figure
In the supplementary device manual "PLC programming with CoDeSys
®
2.3" more detailed
information about the use of the programming system "CoDeSys for Automation Alliance" is given.
This manual can be downloaded free of charge from
ifm's
website at:
> Select country/language > [Service] > [Download] > [Bus system AS-Interface]
Ethernet (option)
To connect the PC with the programming software directly to the optional Ethernet programming
interface of the controllere, you need a cross-over patch cable Cat5 with RJ45 connector on both
sides.
→ article no. EC2080
Description of the Ethernet programming interface:
→ separate supplementary manual for this device manual.