![background image](http://html1.mh-extra.com/html/ifm/ae1300/ae1300_operating-instructions-manual_3883380028.webp)
edgeController
28
>
7.1
Recovery mode
Content
Starting the recovery mode ....................................................................................................................28
Updating the runtime system ..................................................................................................................28
Restoring the data backup......................................................................................................................29
Configuring the Ethernet interfaces ........................................................................................................30
Quitting the recovery mode ....................................................................................................................31
61299
>
7.1.1
Starting the recovery mode
61300
The user can start the recovery mode via the set-up mode.
To start the recovery mode:
► Boot the unit in the set-up mode (→
Starting the set-up mode
(
► Change to the recovery mode (→
Starting the recovery mode
(
>
The edgeGateway boots in recovery mode.
The recovery mode allows access to the following functions:
Button
Description
[UPDATE FROM FILE]
→
Updating the runtime system
(
→ p.
→
Restoring the data backup
(
→ p.
[NETWORK SETUP]
→
Configuring the Ethernet interfaces
(
→ p.
[RESTART]
→
Quitting the recovery mode
(
→ p.
>
7.1.2
Updating the runtime system
61301
NOTICE
Interrupting the update process may result in a loss of the user data stored on the device.
>
Risk of data loss!
► Do not interrupt the update process.
► Do not interrupt the voltage supply during the update process.
► Select one of the following options:
•
Updating the runtime system via USB interface
(
•
Updating the runtime system via web browser
(