IFM AE1300, Operating Instructions Manual

Page: 43 / 47

edgeController
43
>
7.2.9 Leaving the main set-up menu
61333
Requirements:
•
The set-up menu is active (
→
Show the main set-up menu (
→ p.
34 )).
► Click on
.
>
The device leaves the set-up main menu.
>
The screen shows the start page of the set-up mode.
>
7.2.10 Starting the recovery mode
61334
Requirements:
•
The set-up menu is active (
→
Show the main set-up menu (
→ p.
34 )).
► Click on
.
>
The device changes to the recovery mode (
→
Recovery mode (
→ p.
28 )).
>
7.2.11 Rebooting the device
61335
To reboot the device:
Requirements:
•
The set-up menu is active (
→
Show the main set-up menu (
→ p.
34 )).
► Click on
.
>
The device reboots.
If a valid project is loaded on the device, this project will be started automatically after a
reboot.
If no valid project is stored on the device, the set-up menu will appear after rebooting.