IFM AE1300, Operating Instructions Manual

Page: 28 / 47

edgeController
28
>
7.1 Recovery mode
Content
Starting the recovery mode ....................................................................................................................28
Updating the runtime system ..................................................................................................................28
Restoring the data backup......................................................................................................................29
Configuring the Ethernet interfaces ........................................................................................................30
Quitting the recovery mode ....................................................................................................................31
61299
>
7.1.1 Starting the recovery mode
61300
The user can start the recovery mode via the set-up mode.
To start the recovery mode:
► Boot the unit in the set-up mode (→
Starting the set-up mode (
→ p.
32 )).
► Change to the recovery mode (→
Starting the recovery mode (
→ p.
43 )).
>
The edgeGateway boots in recovery mode.
The recovery mode allows access to the following functions:
Button Description
[UPDATE FROM FILE]
→
Updating the runtime system (
→ p.
28 )
→
Restoring the data backup (
→ p.
29 )
[NETWORK SETUP]
→
Configuring the Ethernet interfaces (
→ p.
30 )
[RESTART]
→
Quitting the recovery mode (
→ p.
31 )
>
7.1.2 Updating the runtime system
61301
NOTICE
Interrupting the update process may result in a loss of the user data stored on the device.
>
Risk of data loss!
► Do not interrupt the update process.
► Do not interrupt the voltage supply during the update process.
► Select one of the following options:
•
Updating the runtime system via USB interface (
→ p.
29 )
•
Updating the runtime system via web browser (
→ p.
29 )