edgeController
26
6
Set-up
Content
Getting started ........................................................................................................................................26
Required documentation ........................................................................................................................26
41644
>
6.1
Getting started
61295
► Switch on the operating voltage of the device.
>
After the unit is switched on, the start image appears for approx. 10 to 15 seconds. During this
time, the booting process is running in the background.
>
After the booting process, the saved boot application opens automatically.
Upon delivery, a demo application is stored on the device. The demo application shows the current IP
settings of the Ethernet interfaces. The user can change the IP settings of the Ethernet interfaces
using the demo application.
The user can replace the demo application with a user-specific application (
→ Programming manual
AE1300).
>
6.2
Required documentation
61296
To set up and program the unit, the following documents are required:
•
Operating instructions AE1300
•
Programming manual AE1300
•
Data sheet
The documents can be downloaded from the internet: