UK
Field modules DP
27
The module is equipped with various features� The default settings have been
selected in such a way that device configuration is usually not necessary�
The scaling of the inputs 0/4���20 mA can be modified, if required; an automatic
limit value monitoring is also provided�
The module is parameterised via the fieldbus� The parameters are stored
permanently in the module, even in the event of a power failure�
The analogue input signal is measured via a differential input� If the sensor does
not provide two lines for differential measurement (e�g� 24 V, GND and signal),
then GND and input have to be bridged�
Pin 5 (shield) is capacitively coupled to the conductive base surface of the module�
Functions of the channel LEDs
LED
Status
Description
R
"Run"
green
Data are transferred to the D/A converter�
off
Presently, there is no data transfer�
E
"Error"
red
Data transmission error
Example:
– Wire break
– Measuring value outside the measuring range
off
Error-free data transfer
Summary of Contents for Ecomot300 AC2630
Page 35: ...UK Field modules DP 35 ...
