IFM Electronic Ecomot300 AC2630, Device Manual

Page: 26 / 35

Field modules DP
26
Pin 5 (shield) is capacitively coupled to the conductive base surface of the module�
Supply voltage
U
B
powers the fieldbus electronics� It is electrically isolated from U
L
�
U
L
is used for sensor supply; it is not required for the function of the modules�
Functions of the channel LEDs
LED Status Description
R
"Run" green Data are transferred to the D/A converter�
off Presently, there is no data transfer�
E
"Error" red Data transmission error
Example:
– Wire break
– Measuring value outside the measuring range
– Temperature compensation out of valid range
off Error-free data transfer
Process data
The analogue input module processes signals from -10 V���10 V with a resolution
of 16 bits�
Process data Measured value
hex decimal
8000 -32768 -10 V
C001 -16383 - 5V
0000 0 0
3FFF 16383 5V
7FFF 32767 10 V
8.3.2 AC2636 FieldModuleDP 4AI (C) M12
The analogue module AC2636 processes signals in the range of 0/4���20 mA�
The input current is digitalised with a resolution of 16 bit, electrically isolated and
transferred to the higher-level automation device�
The 4 input channels are differential inputs and have a common internal ground
potential�