IEMCA VIP80 Evolution, Manual For Use And Maintenance

Page: 81 / 86

9 - PART REPLACEMENT VIP80E
GB
9 - Pag. 3 / 5
9.3 FEED BELT REPLACEMENT
For this operation proceed as
follows:
- Open the top cover.
- Loosen the nut (B).
- Loosen the belt through screw
(A) and lock nut.
- Disassemble the plate (C) and
replace the belt.
- Assemble the plate again (C).
- Adjust the belt tension (see
section 5.5.).
- Close the top cover again.
9.4 PLC BATTERY REPLACEMENT
Replace the battery when on the
hand-held control appears the
message "PLC battery exhausted" or
once a year.
IMPORTANT:
when this message is
displayed, it is necessary
to replace the battery
within a day, in order to
prevent data from being
erased from the "PLC/CN
Software".
For replacement proceed as follows.
- unscrew the plug (A) and extract
the battery (B);
- insert a new battery (AA 3.6 Volt Lithium type), take care of inserting it in the correct way
and screw the plug (A) again.