IEMCA VIP80 Evolution, Manual For Use And Maintenance

Page: 13 / 86

2 - TECHNICAL INFORMATION VIP80E
GB
2 - Pag. 3 / 14
2.1.1 MAIN COMPONENTS
A Magazine; contains the bars to be loaded.
B Sorter unit; lifts the first bar, from the magazine, and unloads it on the "bar drop control
device".
C "Limit stop" device; correctly positions the first bar, within the magazine, before it is lifted
by the bar selector unit.
D Bar drop control unit; inserts the bar onto the guide.
E Guide unit; directs the bar and inserts it correctly in the lathe.
F Carriage unit; inserts the bar in the lathe.
G Bar-pushing unit; moves the bar forward in the lathe, until its completion.
H Feathering device; is started by the arrival of the bar fore end.
L Drive feeding unit; transmits, by means of a toothed belt, the motions to the carriage and to
the bar pusher.
M Drive cam unit; drives the cams of the limit stop, bar drop control and bar selecting units.
N Hand-held control; sets the programming and starts the operative phases of the bar feeder.
P Electric cabinet; houses the electric control panel.