IEMCA VIP80 Evolution, Manual For Use And Maintenance

Page: 8 / 86

GB
1 - GENERAL INFORMATION VIP80E
1 - Pag. 2 / 4
1.1 TERMS OF WARRANTY
The warranty validity is subordinated to a correct assembly and coupling of the bar feeder to
lathe. In particular, before the first start-up, carry out an accurate check to make sure the bar
feeder is correctly aligned with the lathe and fastened with the expansion plugs as shown in
section 4.
The product warranty is valid only if the bar loader is
installed by an authorized technician with Original
Installation Certificate. Please ask the technician, who will
make the installation, to show the certificate, in order to
ascertain the quality of the technical works being carried
out.
The warranty shall begin from the date on the Installation
Certificate duly filled in and signed.
The document must be sent per mail to:
CUSTOMER SERVICE
IEMCA division of IGMI spa
48018 Faenza (Ra) ITALY - Via Granarolo,167
1.2 MANUAL PURPOSE
This manual, which is an integral part of the bar feeder, has been carried out by the
manufacturer in order to provide all necessary information for those who are authorised to
interact with it.
Besides adopting a good use technique, the receivers must read this information carefully and
apply it rigorously.
This information has been carried out by the manufacturer in his mother tongue language
(Italian) and can be translated into other languages in order to satisfy any legal and/or
commercial needs.
Some time devoted to the reading of such information will enable the users to avoid any risk to
the health and safety of people as well as economic damages.
If in this manual there is some information supplementary to the effective equipment of the bar
feeder, it does not interfere with the reading.
Keep this manual for the whole life of the bar feeder in a well-known and easily accessible
place in order to have it always available when it is necessary to consult it.