IEMCA VIP80 Evolution, Manual For Use And Maintenance

Page: 14 / 86

GB
2 - TECHNICAL INFORMATION VIP80E
2 - Pag. 4 / 14
2.2 OPERATING CYCLE
Below are represented and
described the phases of the bar
feeder operating cycle.
- At the stop of the lathe
operating cycle, the bar pusher
(A) moves back to the limit stop
position.
- The bar pusher (A) and the "bar
drop control" unit (B) are lifted.
At the same time, also the bar
selecting unit (C) that loads the
first bar on the "bar drop
control" unit is lifted.