IEMCA VIP80 Evolution, Manual For Use And Maintenance

Page: 52 / 86

GB
5 - ADJUSTMENTS AND SETTING-UP VIP80E
5 - Pag. 2 / 5
5.1 PRELIMINARY NOTE ON ADJUSTMENT
IMPORTANT:
Before carrying out any adjustment, start all safety devices provided and check
if it is necessary to inform the staff operating around and people close to the
area. In particular, it is recommended to adequately signal the adjacent areas
and to prevent anyone from approaching all the devices that, if started, could
cause unexpected damages and harm to people.
5.2 MAGAZINE ADJUSTMENT
The adjustment must be carried out
according to the diameter of the bar
to be loaded.
For the adjustment proceed as
follows:
- Rotate the knob (C) until
displaying the diameter of the
bar to be loaded, on the
millimetre counter (A). At the
same time the magazine
inclination and the adjustment of
the "stop" device (B) is
obtained.