IEMCA VIP80 Evolution, Manual For Use And Maintenance

Page: 60 / 86

GB
6 - USE AND OPERATION VIP80E
6 - Pag. 4 / 13
6.3 KEYBOARD MANUAL CONTROLS DESCRIPTION
1 - Start push-buttons; opposite push-buttons
enabling the keys for some functions. Press
both push-buttons and the key for the function
to be selected simultaneously.
2 - It selects the keyboard modes;
- position A; 'message displaying' mode.
- position B; 'parameter displaying' mode.
3 - It selects the manual mode.
4 - Multifunction key
- Scrolls the page up.
- Moves the selection cursor upwards.
- Increases by one unit the value set in the date
and time programming mode.
5 - It selects the automatic mode.
6 - Multifunction key
- Selects the previous parameter.
- Moves the selection cursor leftwards.
7 - It selects the semiautomatic mode.
Press to select, press again to deselect.
8 - Multifunction key
- Selects the next parameter
- Moves the selection cursor rightwards
9 - It activates a 'step-by-step' operating cycle: a cycle step is carried out every time the key
is pressed.
10 - Multifunction key
- Scrolls the page down.
- Moves the selection cursor downwards.
- Decreases by one unit the value set in the date and time programming mode.
11 - It lifts the guide and bar pusher units.
It can be activated only after enabling the start push-buttons (1) (keep them pressed). Release
when the led signalling that the movement ended lights up. Activate only if a failure
occurs and the bar must be removed from the spindle (bar feeder side).