60
Mobil-O-Graph
®
, operating instructions, Rev. 5.1 10/2015, GmbH
4.
H
ypertension
M
anagement
S
oftware
Client-Server
4
Further information on the vascular age display
:
The vascular age of a patient is calculated based on the pulse wave velocity measured. In addition to the nor-
mal age-related development of arterial stiffness in healthy people (green curve), measured in metres per sec-
ond (m/s), there are also people who do not fit the normal pattern (red dot). If you follow the measurement hor-
izontally along to the normal curve, you can derive the vascular age of a patient.
The vascular age display can be changed in the Hypertension Management Software settings. Here, you can
set the standard procedures for:
• Absolute or relative vascular age
• Patient report display with or without smiley
Through combinations of these settings, you have the following options for displaying the vascular age in the
patient report:
Option 1: Depiction with smiley, vascular age: relative
Option 2: Depiction with smiley, vascular age: absolute
Option 3: Depiction without smiley, vascular age: relative
Option 4: Depiction without smiley, vascular age: absolute
4.12 e-health
The HMS CS supports the
e-health service data base
(telemedicine) provided by I.E.M. GmbH. Using this ser-
vice you can setup your own virtual patient clinic. Vital values measured by the patient himself are transferred
via mobile radio to a server and can be synchronized with the HMS CS at any time.
Using the client-server solution you can:
■
Create patients for e-health on the e-health server.
■
Synchronize the data of selected patients with the e-health server.
■
Request telemetrically surveyed measured values
■
Save measured practice values on the server and enable access to them for your colleagues
4.12.1 Activate e-health service
►
Click on
settings
in the menu bar and then on
e-health service
.
►
The
e-health service
window appears
►
Check the
active
box and thereby activate the e-health service.
►
Enter the user name and password, which you received from I.E.M. GmbH or your retailer.
►
Click on
export settings
.
►
The
export settings
window appears.