IEM Mobil-O-Graph NG, Operating Instructions Manual, Page: 41 / 92

4. H ypertension M anagement S oftware Client-Server
41
Mobil-O-Graph
®
, operating instructions, Rev. 5.1 10/2015, GmbH
4.8.2 Setting the monitor’s clock
Import the time on the PC into the monitor.
► Click .
► Confirm with
The monitor shows the imported time.
4.8.3 Importing a patient ID
You can save the Patient ID of the selected patient in the monitor. Later, when you import the 24-hour meas-
urements, HMS CS will automatically recognise the patient.
► Click .
► Confirm with
4.8.4 Testing the monitor
You can ensure that the monitor is working properly.
► Click .
The window Device testing appears. Its content depends on the type of monitor.
■ Mobil-O-Graph
®
■ Stabil-O-Graph
®
(optional)
► Click the function key in question.
► Confirm with
Complete testing
► Click .
4.8.5 Deleting old measurements
Measurements in the monitor are usually deleted after transmission to the PC. If however there are still “old”
Measurements from a previous patient in the monitor, HMS CS will indicate this when preparing the monitor
for a “new” patient.
To remove the „old” measurements from the monitor
► Click .
► Confirm with
4.8.6 Setting reminder times
Note: only possible for the Stabil-O-Graph
®
Here you can arrange when and how the patient is reminded to measure BP.
Setting the time
► You decide the reminder time.
Read out reminder times from the monitor
► Click .
4.8.2