51
Mobil-O-Graph
®
, operating instructions, Rev. 5.1 10/2015, GmbH
4.
H
ypertension
M
anagement
S
oftware
Client-Server
The left-hand y-axis with the units
mmHg
applies to systolic, diastolic and mean values (BP values).
The right-hand y-axis with the units
1/min
applies to heart rate.
The x-axis applies to time. The four daily intervals are highlighted. Day counts all three daytime intervals togeth-
er. “
M
” signifies manual measurements
You can see the upper BP limits (systolic, diastolic) as horizontal set-point curves.
Note:
You can set these values in the
Patient information
tab in the BP limits field.
Show and hide mean values
►
Click the option button
MAP
.
Show and hide hourly mean values
►
In the pop-up field
Hourly mean values
, click the required number of hours.
Show or hide heart rate
►
Click the option button
Heart rate.
Display single measurements
►
In the diagram, click the required time point.
A vertical line appears and the measurements are displayed in a window.
Tip:
To see neighbouring measurements, move the mouse over the diagram. The vertical line follows the
mouse movement and the respective values are displayed.
►
Click again to turn off this display.
Zooming in (increasing the size of the diagram)
►
Use the mouse to click in the diagram, hold the mouse button down and drag open the section from
left to right.
Zooming out (return diagram to original size)
►
Use the mouse to click in the diagram, hold the mouse button down and drag open the section from
right to left
.
4.11.3 Profile
In this profile view the following values of the test series will be displayed graphically as a function of time in a
bar diagram:
■
systolic values
■
median Values
■
diastolic values
■
heart rate
►
To display self-measurements, click on the tab
.
4.11.2