38
Mobil-O-Graph
®
, operating instructions, Rev. 5.1 10/2015, GmbH
4.
H
ypertension
M
anagement
S
oftware Client-Server
Begin 24-hour monitoring
Starting situation:
■
The monitor should be disconnected from the PC.
Step
Mobil-O-Graph
®
PC
1)
►
Put the monitor on the patient (put on the cuff
and connect it to the recorder).
►
Switch on the Mobil-O-Graph
®
.
2)
►
Press
for a manual measurement, to
ensure that the monitor works as it should.
►
Wait for the first, manual measurement.
If everything is in order, the patient can leave.
A successful measurement is necessary to
activate the protocol!
After 24-hour monitoring session, connect PC to Mobil-O-Graph
®
via IR-Med infrared interface
After 24-hour monitoring session, transmit data from the monitor to HMS CS.
Starting situation:
■
Mobil-O-Graph
®
is on the patient’s arm and is switched on.
■
PC is connected to IR-Med infrared interface.
Step
Mobil-O-Graph
®
PC
1)
►
Switch off the Mobil-O-Graph
®
.
►
Take the monitor off the patient (take off the
cuff and disconnect the recorder).
2)
►
Point the Infrared interface of the Mobil-O-
Graph
®
towards the
IR-Med
infrared interface
at a distance of 10-15 cm.
3)
►
Switch on the Mobil-O-Graph
®
.
Change to co mode:
►
Hold down
and press
.
►
Press
until
co
flashes on the display.
►
Press
.
co
stops flashing and the buzzer sounds.
4.7.3