IEI Technology WAFER-8523 Page 98 User Manual Download

Page: 98 / 177

WAFER-8523 User Manual

Page 83

storage devices. Some legacy OS do not support this

mode.

Legacy IDE Channels [PATA Pri, SATA Sec]

SATA Only

Only the SATA drives are enabled.

SATA Pri, PATA Sec

EFAULT

The IDE drives are enabled on the Primary

IDE channel. The SATA drives are enabled on

the Secondary IDE channel.

PATA Only

The IDE drives are enabled on the primary

and secondary IDE channels. SATA drives

are disabled.

IDE Master and IDE Slave

BIOS auto detects the presence of IDE devices when entering setup. BIOS displays the

status of the auto detected IDE devices. The following IDE devices are detected and are

shown in the

IDE Configuration

menu:

Primary

IDE

Master

Primary

IDE

Slave

Secondary IDE Master

Secondary IDE Slave

The

IDE Configuration

menu (

876H791H

BIOS Menu 4

) allows changes to the configurations for the

IDE devices installed in the system. If an IDE device is detected and one of the above

listed four BIOS configuration options are selected, the IDE configuration options shown in

Section

792H

6.3.2.1

appear.

6.3.2.1 IDE Master, IDE Slave

Use the

IDE Master

and

IDE Slave

configuration menu to view both primary and

secondary IDE device details and configure the IDE devices connected to the system.

Summary of Contents for WAFER-8523


















































































































































































Search results

Summary of Contents for WAFER-8523

Reviews:

Related manuals for WAFER-8523

Brands by name

Popular brands

IEI Technology WAFER-8523, User Manual

Search results

Summary of Contents for WAFER-8523

Reviews:

Related manuals for WAFER-8523

Brands by name

Popular brands