IEI Technology WAFER-8523, User Manual

Page: 67 / 177

WAFER-8523 User Manual
Page 52
5.1 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the installation of the
WAFER-8523 may result in permanent damage to the WAFER-8523
and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the WAFER-8523. Dry climates are especially susceptible to ESD. It is therefore
critical to strictly adhere to the following anti-static precautions whenever the
WAFER-8523, or any other electrical component, is handled.
Wear an anti-static wristband : Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
Self-grounding : Before handling the board, touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
Use an anti-static pad : When configuring the WAFER-8523, place it on an
antic-static pad. This reduces the possibility of ESD damaging the
WAFER-8523.
Only handle the edges of the PCB : When handling the PCB, hold the PCB
by the edges.
Installation Considerations
NOTE:
The following installation notices and installation considerations should
be read and understood before the WAFER-8523 is installed. All
installation notices should be strictly adhered to. Failing to adhere to
these precautions may lead to severe damage of the WAFER-8523
and injury to the person installing the motherboard.