IEI Technology WAFER-8523, User Manual

Page: 112 / 177

WAFER-8523 User Manual
Page 97
Use the Serial Port Number option to select the serial port to use for remote access.
COM1 D
EFAULT
System is remotely accessed through COM1
COM2 System is remotely accessed through COM2
NOTE : Make sure the selected COM port is enabled through the Super I/O configuration
menu.
Base Address, IRQ [2F8h,3]
The Base Address, IRQ option cannot be configured and only shows the interrupt
address of the serial port listed above.
Serial Port Mode [115200 8,n,1]
Use the Serial Port Mode option to select baud rate through which the console redirection
is made. The following configuration options are available
115200 8,n,1 D
EFAULT
57600 8,n,1
38400 8,n,1
19200 8,n,1
09600 8,n,1
NOTE:
Identical baud rate setting musts be set on the host (a management
computer running a terminal software) and the slave
Flow Control [None]
Use the Flow Control option to report the flow control method for the console redirection
application.
None D
EFAULT
No control flow,
Hardware Hardware is set as the console redirection
Software Software is set as the console redirection