IEI Technology WAFER-8523 User Manual Download

Page: 4 / 177

WAFER-8523 User Manual

Page iv

Packing List

NOTE:

If any of the components listed in the checklist below are missing,

please do not proceed with the installation. Contact the IEI reseller or

vendor you purchased the WAFER-8523 from or contact an IEI sales

representative directly. To contact an IEI sales representative, please

send an email to [email protected].

The items listed below should all be included in the WAFER-8523 package.

1 x WAFER-8523

1 x SATA Cable (P/N: 32000-062800-RS)

1 x KB/MS Cable (P/N: 32000-000138-RS)

1 x Audio Cable (P/N: 32000-072100-RS)

1 x Mini Jumper pack

1 x USB cable (P/N: 32000-073400-RS)

1 x Utility CD

1 x QIG (quick installation guide)

Images of the above items are shown in

Chapter 3

Summary of Contents for WAFER-8523


















































































































































































Search results

Summary of Contents for WAFER-8523

Reviews:

Related manuals for WAFER-8523

Brands by name

Popular brands

IEI Technology WAFER-8523, User Manual

Search results

Summary of Contents for WAFER-8523

Reviews:

Related manuals for WAFER-8523

Brands by name

Popular brands