IEI Technology PCISA-LX User Manual Download Page 99

Page: 99 / 214

Page 99

PCISA -LX CPU Card

BIOS Menu 3: IDE Primary Master

IDE HDD Auto-Detection [Press Enter]

Use the

IDE HDD Auto-Detection

option to enable BIOS to automatically detect the IDE

settings. Select

IDE HDD Auto-Detection

and press

NTER

BIOS automatically detects

the HDD type. Do not set this option manually.

IDE Primary Master [Auto]

Use the

IDE Primary Master

option to activate or deactivate the following drive channels:

Channel 0 Master

Channel 0 Slave

Channel 1 Master

Channel 0 Slave

None

If no drives are connected to the IDE channel select this

option. Once set, this IDE channel becomes

inaccessible and any drives attached to it are

undetected.

Summary of Contents for PCISA-LX























































































































































































































Search results

Summary of Contents for PCISA-LX

Reviews:

Brands by name

Popular brands

IEI Technology PCISA-LX, User Manual

Search results

Summary of Contents for PCISA-LX

Reviews:

Brands by name

Popular brands