IEI Technology PCISA-LX User Manual Download Page 120

Page: 120 / 214

Page 120

IEI® Technology, Corp

PCISA-LX CPU Card

Parallel Port Mode [SPP]

Use the

Parallel Port Mode

option to select parallel port operation mode.

SPP

EFAULT

The parallel port operates in the standard parallel port

(SPP) mode. This parallel port mode works with most

parallel port devices but is slow.

EPP

The parallel port operates in the enhanced parallel port

mode (EPP). The EPP mode supports bi-directional

communication between the system and the parallel

port device and the transmission rates between the two

are much faster than the SPP mode.

ECP

The parallel port operates in the extended capabilities

port (ECP) mode. The ECP mode supports

bi-directional communication between the system and

the parallel port device and the transmission rates

between the two are much faster than the SPP mode.

ECP+EPP

The parallel port is compatible with both ECP and EPP

devices.

Normal

x EPP Mode Select [EPP1.7]

The

EPP Mode Select

option is only available if the

Parallel Port Mode

option is set to

EPP mode. Use the

EPP Mode Select

option to select the parallel port mode standard for

the parallel port.

EPP1.9

EPP 1.9 is selected as the EPP standard.

EPP1.7

EFAULT

EPP 1.7 is selected as the EPP standard.

Summary of Contents for PCISA-LX























































































































































































































Search results

Summary of Contents for PCISA-LX

Reviews:

Brands by name

Popular brands

IEI Technology PCISA-LX, User Manual

Search results

Summary of Contents for PCISA-LX

Reviews:

Brands by name

Popular brands