IEI Technology PCISA-LX, User Manual

Page: 77 / 214

Page 77
PCISA -LX CPU Card
o
Electronic components are easily damaged by ESD. Wearing an ESD cuff
removes ESD from the user’s body and helps to prevent ESD damage.
Place the CPU card on an antistatic pad
o
When the CPU card is installed and configured, place it on an antistatic
pad. This helps to prevent potential ESD damage.
Turn off all power to the PCISA-LX CPU card
o
When working with the CPU card, make sure that it is disconnected from
all power supplies and that no electricity is being fed into the system.
Before and during the installation of the PCISA-LX CPU card DO NOT:
remove any of the stickers on the PCB board. These stickers are required for
warranty validation.
use the product before all the cables and power connectors are properly
connected.
allow screws to come in contact with the PCB circuit, connector pins, or its
components.
4.3 Unpacking
NOTE:
If any of the items listed below are missing when the
PCISA-LX is unpacked, do not proceed with the installation.
Contact the reseller or vendor CPU card was purchased from.
4.3.1 Unpacking Precautions
Some components on PCISA-LX are very sensitive to static electricity and can be
damaged by a sudden rush of power. To protect it from being damaged during the
unpacking process, follow these precautions:
Users should ground themselves to remove any static charge before touching