IEI Technology PCISA-LX User Manual Download Page 16

Page: 16 / 214

Page 16

IEI® Technology, Corp

PCISA-LX CPU Card

1.1 PCISA-LX CPU Card Overview

The PCISA form factor PCISA-LX is fully equipped with advanced multi-mode I/Os. The

PCISA-LX is designed for system manufacturers, integrators, and VARs that want

performance, reliability, and quality at a reasonable price. The PCISA-LX is equipped with

an on-board low-power consumption and high performance AMD Geode™ LX 800

processor.

1.1.1 PCISA-LX Applications

The PCISA-LX is designed for applications in the following areas:

Industrial PC applications

Human Machine Interface (HMI) applications

Marine, GPS and transportation applications

Financial, retail and kiosk applications

1.1.2 PCISA-LX Benefits

Some of the PCISA-LX benefits include:

Low power, high performance

Multiple storage option integration including

40-pin IFM or 3.5” HDD

34-pin floppy disk drive (FDD) support

Dual SATA ports with ALI M5283 RAID 0 and RAID 1 support

1.1.3 PCISA-LX Features

Some of the PCISA-LX features are listed below:

Complies with PCISA form factor

Complies with RoHS

Contains an embedded AMD Geode™ LX 800 500MHz CPU

Supports a DDR 333MHz or 400MHz DIMM with a maximum capacity of 1GB

Supports CRT, 24-bit TTL/18-bit LVDS displays

Supports IDE, dual LAN, five USB 2.0 devices, two RS-232 serial port

connectors, and one RS-232/422/485 serial port connector

Summary of Contents for PCISA-LX























































































































































































































Search results

Summary of Contents for PCISA-LX

Reviews:

Brands by name

Popular brands

IEI Technology PCISA-LX, User Manual

Search results

Summary of Contents for PCISA-LX

Reviews:

Brands by name

Popular brands